Kenco-engineering KFS Fire Safe Valves Uživatelský manuál stáhnout pdf

KENCO ENGINEERING COMPANY

P.O. BOX 470426 TULSA, OK 74147-0426

PHONE: (918) 663-4406 FAX: (918) 663-4480

Web: www.kenco-eng.com e-mail: [email protected]

INSTRUCTIONS FOR INSTALLING FIRE SAFE VALVES

MODELS 50-KFS AND 75-KFS

INLET SIDE

Install the Model 50-KFS as close to the controller inlet or KENCO Low Flow Meter as

possible.

OUTLET SIDE

Install the Model 75-KFS as close to the engine crankcase as possible.

1. All oil lines between the tank and the Fire Safe Valve and also between the Fire

Safe Valve and the controller must be steel. Do not use rubber hose. The lines

connecting to the 50-KFS should be ½” I.D. and the lines connecting to the 75-KFS

should be ¾” I.D.

2. When installing the Fire Safe Valve, the eutectic fuse element should be in a

downward position to ensure that the fuse is exposed directly to the heat source that is

being applied to the Fire Safe Valve.

3. The placement of the Fire Safe Valve into the oil lines is shown in the diagram

below.

Note: Flow on the KFS valve is bidirectional. Either port can serve as the inlet or

outlet.

KENCO ENGINEERING COMPANY P.O. BOX 470426 TULSA, OK 74147-0426 PHONE: (918) 663-4406 FAX: (918) 663-4480 Web: www.kenco-eng.com e-mail: info@kenco-

Žádné komentáře

Kenco-engineering KFS Fire Safe Valves Uživatelský manuál